DIY Christmas Woodworking Plans

🔥+ DIY Christmas Woodworking Plans 08 Aug 2020 Oct 28, 2017 - DIY Morris Chair - Furniture Plans and Projects

DIY Christmas Woodworking Plans Use them to build your own wooden homemade outdoor smokehouse with a ... Wood Smoke House Plans - Build a Smokehouse with these simple free ... VK is the largest European social network with more than 100 million active users.

Blue Jay Bird House Plans Simple

DIY Christmas Woodworking Planshow to DIY Christmas Woodworking Plans for
Building and creating with my hands has always been a passion of mine for 1 last update 2020/08/08 and something I love sharing with others. When I stumbled upon plans for the table I was thrilled and wanted to create the most in-depth video online sharing how to build a farmhouse table.
Building and creating with my hands has always been a passion of mine and something I love sharing with others. When I stumbled upon plans for the table I was thrilled and wanted to create the most in-depth video online sharing how to build a farmhouse table.

I''s built out of 4×4, 2×4, and 2×10 lumber. The large beams give this table a bold look and make the table as solid as a tank. This farmhouse table build will score you a number of brownie points with your lady.

The original plans for the project are from Ana White''s site and there is a downloadable PDF. Ana White and Whitney from Shanty-2-Chic partnered on creating the plans. The project is fairly simple and will take about a day to assemble + finishing time.

Modifications: The only modifications I made to Ana''s to each other) – Need about 40 or so
4.5 inch Torq Screws (for attaching 4×4 top braces to table top) Need about 20
2.5 inch Torq Screws (for attaching 2×4 top braces to table top) Need about 20
Sandpaper
Stain ( or White Vinegar / Steel Wool )

* The 6 inch and 4.5 inch screws can sometimes be difficult to find. I''s plans.)


Wood for the Project

You''s for the main part of the table and a 2×10 for each breadboard end.  Ana''d like to drill pocket holes. I typically space the pocket holes about 8  to 10 inches apart.

Set the Kreg Jig at the 1 1/2 inch setting for the stock thickness. (My video says 2 1/2 inch setting but I meant to say 1 1/2 inch.)

You''s plans.

Farm Table Modifications – Click to Enlarge

Modified Width – Click to enlarge

I built the two ends out of 4×4''t have an extra set up hands to help me, so I used Jack Clamps to help hold everything up while I tied the boards together with 6″ torq screws. I attached the two horizontal 2×4''s. Everything else was kept the same as Ana''s corners.


Finish

I used a #00 Steel Wool and White Vinegar solution to patina the wood and give it an aged look. Put a good handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least 3 to 4 days. The mixture will get darker the longer you let it sit. I let mine sit for a full week. Once diluted, simply brush the mixture on your piece. Oxidation will occur as the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all. If you''s going to turn out. That''cat''cat''postform''-1'>Select Category

DIY Pete $75 off for 1 last update 2020/08/08 Promo Code!DIY Pete $75 off Promo Code!

DIY Christmas Woodworking Planshow to DIY Christmas Woodworking Plans for